BrakesMaster Cylinder Reservoir Filling
Master Cylinder Reservoir Filling
Warning: Refer to
Brake Fluid Irritant Warning .
Caution: Refer to
Brake Fluid Effects on Paint and Electrical
Components Caution .
| 1. |
Visually inspect the brake
fluid level through the brake master cylinder reservoir.
|
| 2. |
If the brake fluid level is at
or below the half-full point during routine fluid checks, the brake
system should be inspected for wear and possible brake fluid
leaks. |
| 3. |
If the brake fluid level is at
or below the half-full point during routine fluid checks, and an
inspection of the brake system did not reveal wear or brake fluid
leaks, the brake fluid may be topped-off up to the maximum-fill
level. |
| 4. |
If brake system service was
just completed, the brake fluid may be topped-off up to the
maximum-fill level. |
| 5. |
If the brake fluid level is
above the half-full point, adding brake fluid is not recommended
under normal conditions. |
| 6. |
If brake fluid is to be added
to the master cylinder reservoir, clean the outside of the
reservoir on and around the reservoir cap prior to removing the cap
and diaphragm. Refer to
Adhesives, Fluids, Lubricants, and Sealers for the recommended
brake fluid. |
|
|
07 Brakes
