- Vectra B Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- Repair Instructions
- Description and Operation
- Labour Time Allowances
- Other Information
- Technical Service Bulletins
- Technical Information
- OHC Petrol Engine
- DOHC Petrol Engine
- Diesel Engine
- Repair Instructions
- Description and Operation
- Diagnostic Information and Procedures
- Other Information
- Technical Service Bulletins
- Schematic and Routing Diagrams
- Technical Information
- General
- Seals and Seal Rings
- Repair Instructions
- Timing Case Cover, Remove and Install reinstallation
- Seal Ring in Timing Case, Replace; Seal Ring - Crankshaft, Front, Replace
- Timing Case, Remove and Install
- Cylinder Head - Cylinder Head Cover, Remove and Install
- Vacuum Pump, Remove and Install
- Intake Manifold - Upper Part, Remove and Install
- Intake Manifold - Lower Part, Remove and Install
- Exhaust Manifold with Turbocharger, Remove and Install
- Cylinder Head, Remove and Install and Install Cylinder Head
- Seal Ring - Rear Crankshaft, Replace
- Oil Filter Housing, Remove and Install (up to MY '98)
- Oil Pan, Remove and Install
- Oil Intake Pipe, Remove and Install reinstallation
- Dynamic Oil Level Control Sensor, Remove and Install
- Oil Temperature Sensor, Remove and Install
- Coolant Flange - Cylinder Block, Remove and Install
- Thermostat/Thermostat Housing (Radiator), Remove and Install
- Alternator Bracket (Coolant Flange), Remove and Install
- Coolant Pump, Remove and Install
- Injection Nozzle Traverse, Remove and Install
- Injection Nozzles, Remove and Install reinstallation
- Technical Data - Recommended Torque Values
- Oil Filter Housing, Remove and Install (as of MY '98)
- Fan Motor Thermoswitch, Remove and Install (X 20 DTH)
- Valve Stem Seals, Replace (Cylinder Head Installed)
- Engine Management System EDC MSA 15.6 / EDC 15 M Crankshaft Pulse Pick-up, Remove and Install
- Coolant Temperature Sensor, Remove and Install
- Charge Pressure Sensor, Remove and Install
- Turbocharger, Remove and Install
- Specifications
- Special Tools and Equipment
- Technical Service Bulletins
- Ribbed V-Belt
- Engine Damping Block
- Oil Circulating
- Timing Gear Case
- Cylinder Block
- Cylinder Head
- Vacuum Pump
- Fuel Injection Systems
- Engine Electrics
- Cooling System
- Turbo-Charging
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- R Accessories