- Running gear
- Body
- Engine, mechanics
- Power transmission
- Power unit
- Motronic MP 9.0 injection and ignition system
- K-Jetronic/Ignition system
- Self diagnosis, V.A.G Inspection Service
- Mixture preparation system, mechanical injection
- K-jetronic injection system
- Fitting locations - overview (engine code: JH)
- Servicing K-Jetronic injection system
- Technical data
- Safety measures
- Rules for cleanliness
- Idling adjustment (engine code: DX, EG, JJ, KT, and JH without catalyst)
- Idling adjustment (engine code: JH with catalyst)
- Checking idling speed boost (09.84 >)
- Checking adjusting lever and control plunger
- Checking and adjusting air flow meter plate position (engine code: DX and KT >02.86, EG,JH, JJ)
- Checking/adjusting rest position and free travel of air glow meter plate (engine code: DX and KT 03.86 >)
- Removing and installing control plunger (engine code: DX and KT 03.86>)
- Checking cold start valve and thermo time switch
- Cold acceleration enrichment: Retrofitting (engine code: DX and KT >07.84, JH with vacuum switch 08.87>)
- Checking cold acceleration enrichment (engine code: DX and KT 08.84 >)
- Checking diaphragm pressure switch (engine code:DX and KT 08.84 >)
- Checking and adjusting idling switch (engine code: DX and KT 08.84 >)
- Checking and adjusting full throttle switch (engine code: JH)
- Checking auxiliary air valve
- Checking warm-up valve
- Checking and adjusting system pressure
- Checking holding pressure
- Comparing injection delivery
- Basic throttle valve setting
- Checking regulated exhaust system (engine code: JH)
- Vacuum connections (engine code: EG)
- Vacuum connections (engine code: DX 11.90 >)
- Ignition system, glow plug system
- 34 PICT, Keihin carburettor and ignition system
- 4 Cyl injection engine (2 valve), Mechanics
- 4 cyl. carburetor engine, mechanics (1.5, 1.6 and 1.8 litre engine)
- Heating, ventilation, air conditioning system