Hydraulic tappet (one) - replaced with camshaft removed
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Timing system › Hydraulic tappet (one) - replaced with camshaft removed
‹ Prev Valve tappets - check clearanceNext › Hydraulic tappet (one) - replace with cylinder head extension removed
EngineHydraulic tappet (one) - replaced with camshaft removed
Hydraulic tappet (one) - replaced with camshaft removed
Removing
Remove the relevant hydraulic tappet using an appropriate magnetic tool
Refitting
Lubricate with engine oil, then place the hydraulic tappet back in its housing.
Removing
Remove the relevant hydraulic tappet using an appropriate magnetic tool
Refitting
Lubricate with engine oil, then place the hydraulic tappet back in its housing.
Removing
1. Withdraw and remove the hydraulic tappet to be replaced from its housing.
Refitting
Lubricate with engine oil, then place the new hydraulic tappet back in its housing.
‹ Prev Valve tappets - check clearanceNext › Hydraulic tappet (one) - replace with cylinder head extension removed
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTEngine gasket setSearch: Alfa Romeo 147 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.