Valve tappets - check and adjust clearance

Operation 1036H10 · Tappets and rocker shafts

1.9 JTD 8V

Refer to op. 1016A10 sound-proofing cover - r + r

Refer to op. 1016A20 single cam cover - r + r and replace gasket

Refer to op. 4450B04 right front wheel r r

Refer to op. 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.

Refer to op. 1036H14 valve tappets - check clearance

1. Lower the tappet using the appropriate tool.

2. Fit a tool to hold the tappet down, then withdraw the pressure lever fitted previously.

3. Remove the valve clearance adjustment pad and replace it using a suitable shim.

Remove the tool for keeping the tappet lowered.

Repeat the above procedure for the remaining valves.

Refer to op. 1036H14 valve tappets - check clearance

Refer to op. 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.

Refer to op. 4450B04 right front wheel r r

Refer to op. 1016A20 single cam cover - r + r and replace gasket

Refer to op. 1016A10 sound-proofing cover - r + r