Fixed timing system tensioner (one) r + r

Operation 1032C32 · Timing system tensioners

1.6 TS

Removing

Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Right side).

Proceed with the removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).

Proceed with the removal - 1092G10 single engine belt r r.

Proceed with the removal - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with the removal - 1092G20 engine component single belt fixed tensioner - one - r + r.

Proceed with the removal - 1032D12 timing system protective cover(s) - r + r.

Proceed with the removal - 1016A40 ignition coil cover on cylinder head- r+r.

Proceed with the removal - 5510C14 ignition coil/s - r+r.

Proceed with the removal - 1016A20 single cam cover - r + r and replace gasket.

Proceed with the removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with the removal - 1032C30 fixed timing system tensioner - r + r with timing belt removed.

Refitting

Proceed with the refitting - 1032C30 fixed timing system tensioner - r + r with timing belt removed.

Proceed with the refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with the refitting - 1016A20 single cam cover - r + r and replace gasket.

Proceed with the refitting - 5510C14 ignition coil/s - r+r.

Proceed with the refitting - 1016A40 ignition coil cover on cylinder head- r+r.

Proceed with the refitting - 1032D12 timing system protective cover(s) - r + r.

Proceed with the refitting - 1092G20 engine component single belt fixed tensioner - one - r + r.

Proceed with the refitting - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with the refitting - 1092G10 single engine belt r r.

Proceed with the refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).

Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Right side).

2.0 TS

Removing

Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Right side).

Proceed with the removal - 7055B54 under-engine guard - r r.

Proceed with the removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).

Proceed with the removal - 1092G10 single engine belt r r.

Proceed with the removal - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with the removal - 1092G20 engine component single belt fixed tensioner - one - r + r.

Proceed with the removal - 1092G14 engine component single belt mobile tensioner - r + r.

Proceed with the removal - 1032D12 timing system protective cover(s) - r + r.

Proceed with the removal - 1092E10 counter-rotating shaft drive toothed belt - r + r.

Proceed with the removal - 1016A40 ignition coil cover on cylinder head- r+r.

Proceed with the removal - 5510C14 ignition coil/s - r+r.

Proceed with the removal - 1016A20 single cam cover - r + r and replace gasket.

Proceed with the removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with the removal - 1032C30 fixed timing system tensioner - r + r with timing belt removed.

Refitting

Proceed with the refitting - 1032C30 fixed timing system tensioner - r + r with timing belt removed.

Proceed with the refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with the refitting - 1016A20 single cam cover - r + r and replace gasket.

Proceed with the refitting - 5510C14 ignition coil/s - r+r.

Proceed with the refitting - 1016A40 ignition coil cover on cylinder head- r+r.

Proceed with the refitting - 1092E10 counter-rotating shaft drive toothed belt - r + r.

Proceed with the refitting - 1032D12 timing system protective cover(s) - r + r.

Proceed with the refitting - 1092G14 engine component single belt mobile tensioner - r + r.

Proceed with the refitting - 1092G20 engine component single belt fixed tensioner - one - r + r.

Proceed with the refitting - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with the refitting - 1092G10 single engine belt r r.

Proceed with the refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).

Proceed with the refitting - 7055B54 under-engine guard - r r.

Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Right side).

3.2 V6

Removing

Position the vehicle on the ramp.

Proceed with removal - 4450B04 right front wheel r r.

Proceed with removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R..

Proceed with removal - 1092G10 single engine belt r r.

Proceed with removal - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with removal - 1032D12 timing system protective cover(s) - r + r.

Proceed with removal - 1016A42 left hand cylinder head ignition coil cover - r+r.

Proceed with removal - 5510C16 left hand cylinder head ignition coil - r+r.

Proceed with removal - 1016A30 left cam cover - r + r and replace gasket.

Proceed with removal - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r.

Proceed with removal - 5510C18 right hand cylinder head ignition coil - r+r.

Proceed with removal - 1016A34 right-hand cam cover - r + r and replace gasket.

Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

FOR THE TIMING BELT UPPER FIXED TENSIONER, PROCEED AS FOLLOWS.

1. Undo the bolt (1a) and remove the upper fixed timing belt tensioner (1b).

FOR THE TIMING BELT LOWER FIXED TENSIONER, PROCEED AS FOLLOWS.

2. Undo the bolt (2a) and remove the lower fixed timing belt tensioner (2b).

Refitting

Fit the fixed timing belt tensioner and secure by tightening the bolt to the recommended torque.

Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with refitting - 1016A34 right-hand cam cover - r + r and replace gasket.

Proceed with refitting - 5510C18 right hand cylinder head ignition coil - r+r.

Proceed with refitting - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r.

Proceed with refitting - 1016A30 left cam cover - r + r and replace gasket.

Proceed with refitting - 5510C16 left hand cylinder head ignition coil - r+r.

Proceed with refitting - 1016A42 left hand cylinder head ignition coil cover - r+r.

Proceed with refitting - 1032D12 timing system protective cover(s) - r + r.

Proceed with refitting - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with refitting - 1092G10 single engine belt r r.

Proceed with refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R..

Proceed with refitting - 4450B04 right front wheel r r.

Remove the car from the ramps.

1.9 JTD 8V

Removing

- 1016A10 sound-proofing cover - r + r

- 1008C10 power unit upper reaction link r r

- 1008C14 engine link bracket - r r

- 1060G80 ds electric injection control unit - r r

- 4450B04 right front wheel r r

- 7055B54 under-engine guard - r r

- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.

- 1092G10 single engine belt r r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032C30 fixed timing system tensioner - r + r with timing belt removed

Refitting

- 1032C30 fixed timing system tensioner - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1092A10 Crankshaft services PULLEY - R.R.

- 1092G10 single engine belt r r

- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.

- 7055B54 under-engine guard - r r

- 4450B04 right front wheel r r

- 1060G80 ds electric injection control unit - r r

- 1008C14 engine link bracket - r r

- 1008C10 power unit upper reaction link r r

- 1016A10 sound-proofing cover - r + r

1.9 JTD 16V

Removing

Proceed with removal - 1008C10 power unit upper reaction link r r.

Proceed with removal - 1060G80 ds electric injection control unit - r r.

Proceed with removal - 4450B04 right front wheel r r.

Proceed with removal - 7055B54 under-engine guard - r r.

Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with removal - 1092G10 single engine belt r r.

Proceed with removal - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with removal - 1092G20 engine component single belt fixed tensioner - one - r + r.

Proceed with removal - 1032D12 timing system protective cover(s) - r + r.

Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with removal - 1032C30 fixed timing system tensioner - r + r with timing belt removed.

Refitting

Proceed with refitting - 1032C30 fixed timing system tensioner - r + r with timing belt removed.

Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with refitting - 1032D12 timing system protective cover(s) - r + r.

Proceed with refitting - 1092G20 engine component single belt fixed tensioner - one - r + r.

Proceed with refitting - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with refitting - 1092G10 single engine belt r r.

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with refitting - 7055B54 under-engine guard - r r.

Proceed with refitting - 4450B04 right front wheel r r.

Proceed with refitting - 1060G80 ds electric injection control unit - r r.

Proceed with refitting - 1008C10 power unit upper reaction link r r.