Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Maintenance03 Diagnosis – checks04 Engine (1.6 and 2.0 Twin Spark)05 Clutch06 Gearbox (manual and Selespeed)07 Front axle08 Brakes, ABS and traction control09 Steering10 Suspension and wheels11 Heating, air conditioning and washers12 Electrical equipment13 Body14 Body panels and reinforcement15 Wiring diagrams16 Connectors and pin-outs17 Wiring harnesses18 Fault diagnosis19 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2002)14 · Body panels and reinforcement
14 · Body & interior

Bodyshell protection

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2002
Section
General › Bodyshell protection
Body panels and reinforcementBodyshell protection

BODYSHELL PROTECTION

The bodyshell has been designed to be resistant for many years (8 years for perforation, 10 years for structural weakening) to any kind of environmental attacks as far as both the internal parts, which are not visible but potentially subject to

corrosion, and the external parts, subject above all to damage which could adversely affect the appearance of the vehicle, are concerned.

This result has been achieved by designing the structure of interior panels to limit exposure to corrosive infiltrations and making widesperad use of galvanised panels.

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.