Detonation sensor (one) - r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine ignition › Detonation sensor (one) - r.r.
Electrical equipmentDetonation sensor (one) - r.r.
DETONATION SENSOR (ONE) - R.R.
Removing
- Position the vehicle on a lift.
1. Disconnect electrical connection (1a), undo the bolt and remove knock sensor (1b).
| Description | Connector | |
|---|---|---|
| 1a | Knock sensor - 2 | See K050 DETONATION SENSOR |
Refitting
- Place the knock sensor back in its housing, connect the electrical connection and tighten the new bolt to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Knock sensor | Bolt (to be replaced) | M8 | 2.2 ÷ 2.7 | 1.4 16v |
- Remove the vehicle from the lift.
Removing
- Position the vehicle on a lift.
1. Disconnect electrical connection (1a), undo the bolt and remove knock sensor (1b).
| Description | Connector | |
|---|---|---|
| 1a | Knock sensor | See K050 DETONATION SENSOR |
Refitting
- Position the detonation sensor in its housing and tighten the new bolt to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Knock sensor | Bolt (to be replaced) | M8 | 2.2 ÷ 2.7 | 1.4 16v |
- Connect the electrical connection for the detonation sensor.
- Remove the vehicle from the lift.
Parts & tools for this job For 2007 Fiat Bravo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.