Engine RPM sensor - r+r
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine ignition › Engine RPM sensor - r+r
Electrical equipmentEngine RPM sensor - r+r
ENGINE RPM SENSOR - R+R
Removing
1. Disconnect electrical connection (1a), undo bolt (1b) and remove engine rpm sensor (1c).
| Description | Connector | |
|---|---|---|
| 1a | Rpm sensor | See K046 RPM SENSOR |
Refitting
- Place the engine rpm sensor back in its housing, connect the electrical connection and tighten the bolt to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Rpm sensor | Bolt | M6 | 0.8 ÷ 1.0 | 1.4 16v |
Removing
1. Disconnect the electrical connection (1a), undo the bolt (1b) and remove the engine rpm sensor (1c).
| Description | Connector | |
|---|---|---|
| 1a | Rpm sensor | See K046 RPM SENSOR |
Refitting
- Place the engine rpm sensor back in its housing, connect the electrical connection and tighten the bolt to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Rpm sensor | Bolt | M6 | 0.8 ÷ 1.0 | 1.4 16v |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.