Turbocharger air outlet hose -r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine air supply circuit › Turbocharger air outlet hose -r.r.
TURBOCHARGER AIR OUTLET HOSE -R.R.
Removing
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
1. Loosen the bands and remove the turbocharger air outlet hose.
Refitting
- Place the turbocharger air outlet hose back in its housing and tighten the bands.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
Removing
- Position the vehicle on a lift.
1. Loosen the band securing the turbocharger air outlet hose, turbocharger side.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
1. Loosen the band and remove the turbocharger air outlet hose.
Refitting
- Place the turbocharger air outlet hose back in its housing and tighten the band, heat exchanger side.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Tighten the band securing the turbocharger air outlet hose, turbocharger side.
- Remove the vehicle from the lift.
Parts & tools for this job For 2007 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.