Alarm led not working
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Alarm › Alarm led not working
Fault diagnosisAlarm led not working
ALARM LED NOT WORKING
When the alarm is activated, the control LED does not switch off.
| TEST RESULTS | ||||
| 1 | CHECKS USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and check the following, in order: - presence of faults in the CAN | Move on to Step 2 | Presence of faults in the B-CAN | Restore the correct connections at the nodes involved. | |
| 2 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Using the diagnostic equipment, carry out the active diagnosis for the activation of the LED. | End of diagnosis | The LED is not activated | Replace the LED | |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.