Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Bravo Factory Service Manual (2007-2014)22 · Fault diagnosis
22 · Diagnostics

Boot opening/closing not working

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Doors › Boot opening/closing not working
Fault diagnosisBoot opening/closing not working

BOOT OPENING/CLOSING NOT WORKING

When the luggage compartment is opened/closed using the dedicated button in the dashboard it does not open

TEST RESULTS
1FUSE AND RELAY CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Check the condition of the fuses and relays

See E3046 BOOT OPENING

Move on to Step 2Components faultyReplace the component (in the case of a fuse, find out what caused it to blow)
2CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Press the button in the dashboard and check that the status of the boot lid opening button varies in the parameters ambient at the Body Computer NodeMove on to Step 3

1. Button in dashboard defective

2. Wiring broken

1. Replace the button

2. Move on to Step 3

3ELECTRICAL CIRCUIT CHECKALL OKPROBLEMS ENCOUNTEREDACTION

- Check the electrical connection between the button in the dashboard and the body computer

See E3046 BOOT OPENING

- Check the electrical connection between the body computer and the door management control unit

- Check the electrical connection between the door management control unit and the luggage compartment electric lock

See E3046 BOOT OPENING

Move on to Step 4

Connection between button and body computer broken or not insulated

Connection between body computer and door management control unit broken or not insulated

Connection between door management control unit and electric boot lock broken or not insulated

1. Restore the continuity/insulation of the electrical connection

See E3046 BOOT OPENING

2. Restore the continuity/insulation of the electrical connection

See E3046 BOOT OPENING

Restore the continuity/insulation of the electrical connection

4BOOT OPENING ACTUATOR CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the operation of the boot electric lockEnd of diagnosisElectric lock defective

Replace the electric lock

Op. 7015B10 SINGLE TAILGATE LOCK - R+R OR REPAIR WITH PANEL/PROTECTION REMOVED

5ELECTRICAL CIRCUIT CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the body computer is working properly.End of diagnosisBody Computer defective

Replace the Body Computer

Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.