Direction indicators / hazard warning lights not working
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Lights › Direction indicators / hazard warning lights not working
DIRECTION INDICATORS / HAZARD WARNING LIGHTS NOT WORKING
When the lever on the steering column switch unit is raised or lowered with the ignition ON, the direction indicators do not work. When the button is pressed the hazard warning lights do not work
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Connect the Examiner equipment to the diagnostic socket. Check: - that there are no faults in the body computer - the operation of the lights through active diagnosis | End of diagnosis | Faults present | Continue following the instructions for the diagnostic equipment | |
| None of the lamps manages to come on | Move on to Step 2 | |||
| 2 | ELECTRICAL SYSTEM CHECK | All OK | Problems encountered | Operation |
- Check the continuity and the insulation of the wiring between the Body Computer node and the direction indicators See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS - Check that the direction indicators are correctly earthed | Move on to Step 3 | Wiring between body computer and direction indicators interrupted | Restore the correct electrical connection | |
| Earth reference to direction indicators interrupted | Restore the correct electrical connection | |||
| 3 | CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
| Check that the body computer is working properly | End of diagnosis | Body Computer defective | Replace body computer |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.