Reversing lights not working
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Lights › Reversing lights not working
Fault diagnosisReversing lights not working
REVERSING LIGHTS NOT WORKING
The reversing lights are controlled directly by the switch on the transmission connected to the positive line.
| Test results | ||||
| 1 | REVERSING SWITCH CHECK | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Check that the reversing lights control switch is working correctly | Move on to Step 2 | Switch with defective contact | Replace the switch | |
| 2 | CHECK ON OPERATION OF FUSE AND RELAY | All OK | Problems encountered | Operation |
| Check the operation of relay T6 and fuse F59 in the engine compartment junction unit | Move on to Step 3 | 1. Relay defective 2. Fuse blown | 1. Replace the relay 2. Replace the fuse (and find out what could have caused it to blow). | |
| 3 | ELECTRICAL SYSTEM CHECK | All OK | Problems encountered | Operation |
| Check the continuity and the insulation of the wiring between the reversing switch and the reversing light | Move on to Step 4 | Wiring with short circuit or open circuit | Restore the correct wiring | |
| 4 | BULB OPERATION CHECK | All OK | Problems encountered | Operation |
| Check that the reversing light bulb is working | Move on to Step 5 | Bulb defective | Replace the reversing light bulb | |
| 5 | BODY COMPUTER CONNECTION CHECK | All OK | Problems encountered | Operation |
| Check for deformed terminals or connections not present on the Body Computer | Move on to Step 6 | Missing connections/pins bent | Renew the correct connections | |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.