Injection pump removal (page 2 of 2)

1. Disconnect the vaccum pipe from the inlet manifold and from the fast idle actuator acting at the points shown.
2. Using spanner 1852138000 undo the connectors for the fuel supply pipes at the injectors.
3. Undo the connectors shown at the pump using a spanner and remove the fuel supply pipes.
4. Remove the injection pump acting on the fixings shown in the diagram;.

To refit the injection pump reverse the order of the operations carried out for the removal with the exception of the timing belt.
Before refitting the timing belt it is necessary to check the timing and then the tension of the belt as specified in the paragraph "Replacing timing belt" in the chapter "Removing-refitting power unit".