Removing-refitting injection pump (page 3 of 3)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Fuel system (1910 TD 100)

10 EngineRemoving-refitting injection pump · page 3 of 3

1. Stop the rotation of the injection pump drive pulley by tightening the two service bolts (1) in the special openings in the pump support, then undo the bolts (2) fixing the pulley, undo the bolts (1) and remove the pulley.
2. Acting at the points shown, disconnect the diesel supply pipes from the filter to the pump, the diesel return pipes from the pump to the tank and the diesel return pipes from the injectors to the pump.
3. Undo the fixing bolts and remove the sound insulation shield.
4. Disconnect the electrical connections, disconnect the diesel supply pipe between the tank and the filter, undo the fixing nuts and remove the diesel filter.

02 Engine