Paao4bxo03 (page 4 of 6)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1747 16v)

10 EnginePaao4bxo03 · page 4 of 6

1. Undo the bolts fixing the left drive shaft flange.
2. Remove the upper bolt fixing the shock absorber to the steering knuckle and loosen the lower one to allow the removal of the drive shaft.
3. Disconnect the gearbox control lever and the reaction bracket.
4. Remove the plastic shield shown in the diagram, from the timing side wheel arch.
5. Move the plastic wheel arch liner to one side (timing side) in order to gain access to the anti-evaporation valve; disconnect the appropriate electrical connection.

02 Engine