Replacing rear wing (7090a 54)* (page 4 of 9)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Replacing body panels

70 BodyworkReplacing rear wing (7090a 54)* · page 4 of 9

• Using a hammer and dolly block straighten the edges of the vehicle.

• Remove the excess parts from the replacement part so that the replacement pillars are about 50 mm longer than the part removed from the vehicle.

• Place the spare part in position on the vehicle and check the alignment with the adjacent elements, then fix it using the special self-locking clamps;
• after having made sure that it is perfectly superimposed (pillar and underdoor panel), mark the parts to be removed on the bodyshell using a tracer point.

10 Body & interior