Lateral acceleration and slewing sensor - r.r

Make

Fiat

Model

Croma Factory Service Manual

Year

2005–2010

Section

Traction control › Lateral acceleration and slewing sensor - r.r

BrakesLateral acceleration and slewing sensor - r.r

LATERAL ACCELERATION AND SLEWING SENSOR - R.R

Operation 3350E30 · VEHICLE DIRECTION CONTROL SYSTEM VDC/ESP

Removing

Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.

(Both).

Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.

Op. 7040L28 TUNNEL SWITCH PANEL - R R

Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R

Op. 7040L20 TUNNEL COVER - R.R

1. Undo the nuts (1a), disconnect the electrical connection (1b) and remove the lateral acceleration and slewing sensor (1c).

	Description	Connector
1b	Slewing control unit	See M091 SLEWING CONTROL UNIT

Refitting

- Connect the electrical connection to the lateral acceleration and slewing sensor, then place it back in its housing and secure it using the nuts.

Op. 7040L20 TUNNEL COVER - R.R

Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R

Op. 7040L28 TUNNEL SWITCH PANEL - R R

Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.

Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.

(Both).

12 Brakes