Ignition switch assembly - r+r
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Engine starting › Ignition switch assembly - r+r
Electrical equipmentIgnition switch assembly - r+r
IGNITION SWITCH ASSEMBLY - R+R
Removing
- Turn the ignition key to the OFF position.
- Disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| BATTERY | See A001 BATTERY |
Op. 7040L28 TUNNEL SWITCH PANEL - R R
1. Use an appropriate tool to prise the ignition switch carefully out of its seat.
1. Raise anchorage lever (1a) and disconnect electrical connection (1b) from the ignition switch.
2. Remove the ignition switch from the vehicle.
| Description | Connector | |
|---|---|---|
| 1b | IGNITION DEVICE | See H003 IGNITION DEVICE |
Refitting
- Connect the electrical connections to the ignition switch.
| Description | Connector | |
|---|---|---|
| IGNITION DEVICE | See H003 IGNITION DEVICE |
- Fit the ignition switch in its seat.
Op. 7040L28 TUNNEL SWITCH PANEL - R R
- Reconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| BATTERY | See A001 BATTERY |
Parts & tools for this job For 2005 Fiat Croma
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.