HEATER PLUGS CONTROL UNIT - R.R

Operation 5520C20 · COLD STARTING SYSTEM (DIESEL ENGINES)

1.9 JTD 8v, 1.9 JTD 16v, 2.4 JTD 20v

Removing

- Turn the ignition key to the OFF position.

- Disconnect the negative battery terminal.

1. Undo the nut (1a) fixing the heater plugs control unit (1b) to the partition and rotate it to access the electrical connections.

1. Undo the fixing nut (1a) for the electrical connection (1b) and disconnect the connection.

2. Release the mountings and disconnect the electrical connections (2a) and (2b) and remove the control unit from the vehicle.

Refitting

- Check that the heater plugs control unit is not damaged.

- Connect the electrical connection and secure it using the fastening nut.

- Connect the two electrical connections and attach them using the mountings.

- Secure the control unit to the partition using the fixing nut.

- Reconnect the negative battery terminal.