SUPPLY HOSE TO OPERATING CYLINDER - R.R.

Operation 1820B48 · HYDRAULIC CLUTCH SYSTEM

1.8, 2.2, 1.9 JTD 8v, 1.9 JTD 16v

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Lift up the clip (1a) and disconnect the flexible supply pipe to the operating cylinder (1b), operating cylinder side.

Keep any brake-clutch fluid that comes out.

2. Release the flexible supply pipe to the operating cylinder from the retaining band.

3. Move the flexible supply pipe to the operating cylinder (3a) as far to the side as necessary and disconnect the connector (3b), then remove it.

Refitting

- Connect the flexible supply pipe to the master cylinder to the rigid pipe and tighten the connector to the recommended torque.

- Fasten the flexible supply pipe to the operating cylinder using the band.

- Connect the flexible pipe from the vibration damper to the operating cylinder, operating cylinder side and fasten it using the clip.

Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R