Check spark plug heating fuse
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Instrument/gauge electrical circuits › Check spark plug heating fuse
CHECK SPARK PLUG HEATING FUSE
| STEP | CHECK TO BE PERFORMED | RESOLUTION IF THE CHECK IS NOT OK |
|---|---|---|
| 1 | Turn the ignition key OFF. Reconnect all the disconnected components. Turn off all the electrical users. Insert a new fuse F11 in the engine compartment junction unit and check it does not blow. Move on to Step 3 | Move on to Step 2 |
| 2 | If necessary, repair errors in the wiring between the engine compartment junction unit and spark plug control unit See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT The test can be considered over | Replace the glow plug preheating control unit |
| 3 | Turn the ignition key ON. Check that fuse F11 cuts in | A temporary current overload has occurred in the circuit behind fuse F11. check the electrical connections for the junction unit |
| 4 | Turn the ignition key OFF. Disconnect the harness from a spark plug. Fit a new fuse F11 and check it does not blow. Reconnect the spark plugs and disconnect another, repeating the test until all the spark plugs have been checked. | Replace the spark plug that does not trigger the fuse Op. 5520C10 HEATER PLUGS - R+R |
| 5 | If necessary, repair the faults in the wiring between the spark plug control unit and the glow plugs | Replace the glow plug preheating control unit |
Parts & tools for this job For 2005 Fiat Croma
- PARTSpark plugsSearch: Fiat Croma 2005 spark plugs
- TOOLSpark plug socketSearch: spark plug socket
- TOOLSpark plug gap toolSearch: spark plug gap tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.