Brake pedal switch operation check
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Warning and manoeuvring indicators › Brake pedal switch operation check
‹ Prev Introduction - warning and manouevring signalsNext › Warning and manoeuvring signals - general remarks
Electrical equipmentBrake pedal switch operation check
BRAKE PEDAL SWITCH OPERATION CHECK
The brake switch has four pins.
Connect to pins 1 and 3 using a multimeter and check, by pressing the switch, that the circuits switches from normally closed to normally open.
Connect to pins 2 and 4 using a multimeter and check, by pressing the switch, that the circuits switches from normally open to normally closed.
‹ Prev Introduction - warning and manouevring signalsNext › Warning and manoeuvring signals - general remarks
Parts & tools for this job For 2005 Fiat Croma
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.