REVERSING LIGHT SWITCH - R+R

Operation 5550D22 · BRAKE AND REVERSING LIGHTS

2.2

Removing

- Position the vehicle on a lift.

- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

1. Disconnect the electrical connection from the reversing light switch.

2. Undo and remove the reversing light switch.

Refitting

- Place the reversing light switch in position and tighten it to the recommended torque.

- Connect the electrical connection to the reversing light switch.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

1.9 JTD 8v, 1.9 JTD 16v

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Disconnect the electrical connection from the reversing light switch.

2. Undo and remove the reversing light switch.

Refitting

- Place the reversing light switch in position and tighten it to the recommended torque.

- Connect the electrical connection to the reversing light switch.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

1.8

Removing

1. Disconnect the electrical connection for the reversing light switch.

2. Undo the reversing light switch and remove it from the gearbox.

Refitting

- Place the reversing light switch in position and tighten it to the recommended torque.

- Connect the electrical connection for the reversing light switch.