Air pressure sensor - r + r
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Petrol injection system › Air pressure sensor - r + r
EngineAir pressure sensor - r + r
AIR PRESSURE SENSOR - R + R
Removing
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Op. 1056B17 THROTTLE BODY INTERGRAL WITH DVL - R R
1. Disconnect the electrical connection from the air pressure sensor.
| Description | Connector | |
|---|---|---|
| 1 | Absolute pressure sensor | See K048 ABSOLUTE PRESSURE SENSOR |
2. Remove the air pressure sensor from the air chamber.
Refitting
- Place the air pressure sensor in its housing on the air chamber.
- Connect the electrical connection to the air pressure sensor.
Op. 1056B17 THROTTLE BODY INTERGRAL WITH DVL - R R
- Connect the negative battery terminal.
Parts & tools for this job For 2005 Fiat Croma
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.