Lh cylinder head extension - replace gasket
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Cylinder head – s › Lh cylinder head extension - replace gasket
Lh cylinder head extension - replace gasket
Removing
Place the car on the ramp.
Disconnect the battery negative terminal.
| Name | Connector | |
|---|---|---|
| Battery | A1 |
- 1048A32 sleeve from air cleaner to intake manifold - r + r
- 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r
- 1056B82 injection/ignition system e.c.u. (one) - r + r
- 1056B87 ignition/injection system control unit mount - r r
- 1036G48 rear seal of camshaft of one l/h or r/h top head - r + r and replace seal
- 5510C14 ignition coil/s - r+r
- 4450B04 right front wheel r r
- 7055B54 under-engine guard - r r
- 1092B50 alternator/air conditioner compressor drive belt - adjust tension
- 1092B82 auxilary belt mobile tensioner (one) -r+r
- 1008B10 power unit front mount (timing side) flexible block - replace
- 1008A46 cam shaft left rigid mount - r r
- 1092A10 Crankshaft services PULLEY - R.R.
- 1032D12 timing system protective cover(s) - r + r
- 1032B10 toothed timing belt - r + r for timing adjustment or replacement
- 1084A16 oil dip stick pipe - r r
- 1084A22 engine oil filler - r r
- 1072B14 inlet manifold - r+r and replace seal with air conveyor/box removed
- 1032B40 toothed-driven pulley (one) - r + r with timing belt removed
- 1032D34 timing system guard assemblies - r + r
- 1016B22 lh cylinder head extension - r r with timing belt removed - replace gasket
Refitting
- 1016B22 lh cylinder head extension - r r with timing belt removed - replace gasket
- 1032D34 timing system guard assemblies - r + r
- 1032B40 toothed-driven pulley (one) - r + r with timing belt removed
- 1072B14 inlet manifold - r+r and replace seal with air conveyor/box removed
- 1084A22 engine oil filler - r r
- 1084A16 oil dip stick pipe - r r
- 1032B10 toothed timing belt - r + r for timing adjustment or replacement
- 1032D12 timing system protective cover(s) - r + r
- 1092A10 Crankshaft services PULLEY - R.R.
- 1008A46 cam shaft left rigid mount - r r
- 1008B10 power unit front mount (timing side) flexible block - replace
- 1092B82 auxilary belt mobile tensioner (one) -r+r
- 1092B50 alternator/air conditioner compressor drive belt - adjust tension
- 1092B54 alternator/water pump drive belt - adjust tension
- 4450B04 right front wheel r r
- 7055B54 under-engine guard - r r
- 5510C14 ignition coil/s - r+r
- 1036G48 rear seal of camshaft of one l/h or r/h top head - r + r and replace seal
- 1056B87 ignition/injection system control unit mount - r r
- 1056B82 injection/ignition system e.c.u. (one) - r + r
- 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r
- 1048A32 sleeve from air cleaner to intake manifold - r + r
Connect the battery negative terminal.
| Name | Connector | |
|---|---|---|
| Battery | A1 |
Remove the car from the ramps.
Parts & tools for this job For 2000 Fiat Doblò
- PARTEngine gasket setSearch: Fiat Doblò 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.