Timing system guard assemblies - r + r

Operation 1032D34 · TIMING SYSTEM PROTECTIONS

1.2 8v, 1.4 8v, 1.6 16v, 1.9 JTD 8V, 1.9 DIESEL

Refer to op. 1032D12 timing system protective cover(s) - r + r

Removing

Place the car on the ramp.

Disconnect the battery negative terminal.

- 5530B10 battery - r+r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 1048A32 sleeve from air cleaner to intake manifold - r + r

- 1048A10 air cleaner filtering element - replace

- 1056B82 injection/ignition system e.c.u. (one) - r + r

- 1056B87 ignition/injection system control unit mount - r r

- 1036G48 rear seal of camshaft of one l/h or r/h top head - r + r and replace seal

- 5510C14 ignition coil/s - r+r

- 5510D10 spark plugs - r+r

- 4450B04 right front wheel r r

- 7055B54 under-engine guard - r r

- 1092B50 alternator/air conditioner compressor drive belt - adjust tension

- 1092B82 auxilary belt mobile tensioner (one) -r+r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A46 cam shaft left rigid mount - r r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032D12 timing system protective cover(s) - r + r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B40 toothed-driven pulley (one) - r + r with timing belt removed

1. Undo the bolts (1a) and remove the upper rear timing gear cover (1b).

1. Undo the bolts (1a) and remove the lower rear timing gear cover (1b).

Refitting

Refit the lower rear engine flywheel protection in its seating and fix it using the bolts.

Refit the upper rear engine flywheel protection in its seating and fix it using the bolts.

- 1032B40 toothed-driven pulley (one) - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032D12 timing system protective cover(s) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1008A46 cam shaft left rigid mount - r r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1092B82 auxilary belt mobile tensioner (one) -r+r

- 1092B50 alternator/air conditioner compressor drive belt - adjust tension

- 1092B54 alternator/water pump drive belt - adjust tension

- 7055B54 under-engine guard - r r

- 4450B04 right front wheel r r

- 5510D10 spark plugs - r+r

- 5510C14 ignition coil/s - r+r

- 1036G48 rear seal of camshaft of one l/h or r/h top head - r + r and replace seal

- 1056B87 ignition/injection system control unit mount - r r

- 1056B82 injection/ignition system e.c.u. (one) - r + r

- 1048A10 air cleaner filtering element - replace

- 1048A32 sleeve from air cleaner to intake manifold - r + r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B10 battery - r+r

Disconnect the battery negative terminal.

Remove the car from the ramps.