Toothed drive pulley - r + r

Operation 1032B46 · BELT TIMING SYSTEM

Removing

Place the car on a ramp.

Disconnect the battery negative terminal.

- 1048A10 air cleaner filtering element - replace

- 1032D12 timing system protective cover(s) - r + r

- 4450B04 right front wheel r r

- 7055B54 under-engine guard - r r

- 1092B60 alternator drive belt - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 2110A60 manual gearbox/engine coupling bracket - r+r

- 1032B44 toothed drive pulley - r + r with timing belt removed

Removing

Place the car on the ramp.

- 5530B10 battery - r+r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 1048A32 sleeve from air cleaner to intake manifold - r + r

- 1048A10 air cleaner filtering element - replace

- 1056B82 injection/ignition system e.c.u. (one) - r + r

- 1056B87 ignition/injection system control unit mount - r r

- 1036G48 rear seal of camshaft of one l/h or r/h top head - r + r and replace seal

- 5510C14 ignition coil/s - r+r

- 5510D10 spark plugs - r+r

- 4450B04 right front wheel r r

- 7055B54 under-engine guard - r r

- 1092B50 alternator/air conditioner compressor drive belt - adjust tension

- 1092B82 auxilary belt mobile tensioner (one) -r+r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A46 cam shaft left rigid mount - r r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032D12 timing system protective cover(s) - r + r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed

Removing

Carry out - 7055B54 under-engine guard - r r.

Drain the air conditioner coolant circuit - 0010T84 coolant for air conditioning system dehydrate and recharge.

Carry out - 4450B04 right front wheel r r.

Carry out.

Carry out - 1092C10 power steering and/or self-levelling suspension pump drive belt - r + r.

Carry out - 1092G10 single engine belt r r.

Carry out - 1092A10 Crankshaft services PULLEY - R.R..

Carry out - 2110A60 manual gearbox/engine coupling bracket - r+r.

Carry out - 1020A20 crank case oil sump - r + r clean seals for sealant application.

Carry out - 1020B10 cover of timing system with chain drive - r + r replace oil seal and gasket.

Carry out - 1032A12 CHAIN AND GEARS for timing system - R.R. for timing or Replacement..

Removing

- 7055B54 under-engine guard - r r

- 4450B04 right front wheel r r

- 1092G10 single engine belt r r

- 1032D12 timing system protective cover(s) - r + r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed

Removing

Proceed with the removal - 4450B04 right front wheel r r.

Proceed with the removal - 1092G10 single engine belt r r.

Proceed with the removal - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with the removal - 1008A46 cam shaft left rigid mount - r r.

Proceed with the removal - 1032D12 timing system protective cover(s) - r + r.

Proceed with the removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with the removal - 1032B44 toothed drive pulley - r + r with timing belt removed.

Refitting

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 2110A60 manual gearbox/engine coupling bracket - r+r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1092A10 Crankshaft services PULLEY - R.R.

- 1092B60 alternator drive belt - r + r

- 7055B54 under-engine guard - r r

- 4450B04 right front wheel r r

- 1032D12 timing system protective cover(s) - r + r

- 1048A10 air cleaner filtering element - replace

Connect the negative battery terminal and remove the vehicle from the lift.

Refitting

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032D12 timing system protective cover(s) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1008A46 cam shaft left rigid mount - r r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1092B82 auxilary belt mobile tensioner (one) -r+r

- 1092B50 alternator/air conditioner compressor drive belt - adjust tension

- 1092B54 alternator/water pump drive belt - adjust tension

- 7055B54 under-engine guard - r r

- 4450B04 right front wheel r r

- 5510D10 spark plugs - r+r

- 5510C14 ignition coil/s - r+r

- 1036G48 rear seal of camshaft of one l/h or r/h top head - r + r and replace seal

- 1056B87 ignition/injection system control unit mount - r r

- 1056B82 injection/ignition system e.c.u. (one) - r + r

- 1048A10 air cleaner filtering element - replace

- 1048A32 sleeve from air cleaner to intake manifold - r + r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B10 battery - r+r

Remove the car from the ramps.

Refitting

Carry out - 1032A12 CHAIN AND GEARS for timing system - R.R. for timing or Replacement..

Carry out - 1020B10 cover of timing system with chain drive - r + r replace oil seal and gasket.

Carry out - 1020A20 crank case oil sump - r + r clean seals for sealant application.

Carry out - 2110A60 manual gearbox/engine coupling bracket - r+r.

Carry out - 1092A10 Crankshaft services PULLEY - R.R..

Carry out - 1092G10 single engine belt r r.

Carry out - 1092C10 power steering and/or self-levelling suspension pump drive belt - r + r.

Carry out.

Carry out - 4450B04 right front wheel r r.

Refill the engine oil lubrication system - 0010T11 engine oil check level and top up.

Refill the engine cooling system with coolant - 0010T20 coolant change.

Fill the air conditioner coolant circuit - 0010T84 coolant for air conditioning system dehydrate and recharge.

Carry out - 7055B54 under-engine guard - r r.

Refitting

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032D12 timing system protective cover(s) - r + r

- 1092G10 single engine belt r r

- 4450B04 right front wheel r r

- 7055B54 under-engine guard - r r

Refitting

Proceed with the refitting - 1032B44 toothed drive pulley - r + r with timing belt removed.

Proceed with the refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with the refitting - 1032D12 timing system protective cover(s) - r + r.

Proceed with the refitting - 1008A46 cam shaft left rigid mount - r r.

Proceed with the refitting - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with the refitting - 1092G10 single engine belt r r.

Proceed with the refitting - 4450B04 right front wheel r r.