CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R

Operation 1820B58 · HYDRAULIC CLUTCH SYSTEM

1.3 Multijet · 75 CV

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

- Rectract the clip and disconnect the flexible pipe from the operating cylinder.

1. Retract the clip (1a) and disconnect the damper (1b) from the master cylinder (1c).

- Remove the damper complete with the pipe.

- Retract the clip and disconnect the damper from the rigid pipe.

Refitting

- Connect the damper to the rigid pipe and secure the clip.

- Place the damper complete with pipe in position.

- Connect the damper to the master cylinder and fasten the clip.

- Connect the flexible pipe to the slave cylinder and fasten the clip.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR

1.3 Multijet · 6 Speed, 90 CV

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Move back clip (1a) and disconnect damper (1b) from the master cylinder.

2. Move back clip (2a) and disconnect hose (2b) form the slave cylinder three-way connector.

3. Remove the damper complete with the pipe.

- Retract the clip and disconnect the damper from the rigid pipe.

Refitting

- Connect the damper to the rigid pipe and secure the clip.

- Place the damper complete with pipe in position.

- Connect the hose to the slave cylinder three-way connector and secure the clip.

- Connect the damper to the master cylinder and fasten the clip.

Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

1.9 Multijet

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Move back clip (1a) and disconnect damper (1b) from the master cylinder.

2. Move back clip (2a) and disconnect hose (2b) form the slave cylinder three-way connector.

3. Remove the damper complete with the pipe.

- Retract the clip and disconnect the damper from the rigid pipe.

Refitting

- Connect the damper to the rigid pipe and secure the clip.

- Place the damper complete with pipe in position.

- Connect the hose to the slave cylinder three-way connector and secure the clip.

- Connect the damper to the master cylinder and fasten the clip.

Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

1.3 Multijet · 5 Speed, 90 CV

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

- Rectract the clip and disconnect the flexible pipe from the operating cylinder.

1. Retract the clip (1a) and disconnect the damper (1b) from the master cylinder (1c).

- Remove the damper complete with the pipe.

- Retract the clip and disconnect the damper from the rigid pipe.

Refitting

- Connect the damper to the rigid pipe and secure the clip.

- Place the damper complete with pipe in position.

- Connect the damper to the master cylinder and fasten the clip.

- Connect the flexible pipe to the slave cylinder and fasten the clip.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR