THRUST BEARING LINKAGE - R + R WITH GEARBOX REMOVED

Operation 1820A26 · CLUTCH RELEASE MECHANICAL CONTROL

1.3 Multijet · 75 CV

Removing

Op. 1820A30 THRUST BEARING - R + R WITH GEARBOX REMOVED

1. Remove the circlip.

2. Remove the lever.

3. Remove the outer bush.

1. Remove the thrust control linkage.

2. Remove the inner bush.

Refitting

- Place the inner bush back in its housing.

- Place the thrust control linkage back in its housing.

- Place the outer bush back in its housing.

- Place the lever back in its housing and secure it using the circlip.

Op. 1820A30 THRUST BEARING - R + R WITH GEARBOX REMOVED

1.2 8v, 1.4 8v, 1.4 16v

Removing

Op. 1820A30 THRUST BEARING - R + R WITH GEARBOX REMOVED

1. Remove the circlip.

2. Remove the lever.

3. Remove the outer bush.

1. Remove the thrust control linkage.

2. Remove the inner bush.

Refitting

- Place the inner bush back in its housing.

- Place the thrust control linkage back in its housing.

- Place the outer bush back in its housing.

- Place the lever back in its housing and secure it using the circlip.

Op. 1820A30 THRUST BEARING - R + R WITH GEARBOX REMOVED

1.3 Multijet · 5 Speed, 90 CV

Removing

Op. 1820A30 THRUST BEARING - R + R WITH GEARBOX REMOVED

1. Remove the circlip.

2. Remove the lever.

3. Remove the outer bush.

1. Remove the thrust control linkage.

2. Remove the inner bush.

Refitting

- Place the inner bush back in its housing.

- Place the thrust control linkage back in its housing.

- Place the outer bush back in its housing.

- Place the lever back in its housing and secure it using the circlip.

Op. 1820A30 THRUST BEARING - R + R WITH GEARBOX REMOVED