SUPPLY HOSE TO OPERATING CYLINDER - R.R.

Operation 1820B48 · HYDRAULIC CLUTCH SYSTEM

1.3 Multijet, 1.9 Multijet

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

- Unscrew the engine oil reservoir plug and fit the tool.

1. Undo the bolts (1a) and remove the bracket (1b).

1. Undo the connector (1a) and disconnect the rigid pipe (1b) from the hose.

2. Lift up the spring (2a) and remove the pipe (2b) from the three-way connector.

Refitting

- Refit the pipe in its seat and secure the spring.

- Connect the rigid pipe to the hose and tighten the connector to the recommended torque.

- Fit the bracket in its housing and secure it using the bolts.

Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

1.2 8v, 1.4 8v

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Lift up the clip (1a) and disconnect the clutch fluid pipe (1b) from the slave cylinder.

1. Lift up the clip and disconnect the pipe (1a) from the clutch pump (1b).

Refitting

- Connect the pipe to the clutch pump and secure it using the clip.

- Connect the clutch fluid pipe to the slave cylinder and secure it using the clip.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR