Engine oil pressure warning light switch - r + r
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Engine lubrication › Engine oil pressure warning light switch - r + r
ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R
Removing
- Position the vehicle on a lift.
- Disconnect the negative battery terminal.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
1. Disconnect the electrical connection for the engine oil pressure warning light switch.
| Description | Connector | |
|---|---|---|
| 1 | Insufficient engine oil pressure sensor | See K030 LOW ENGINE OIL PRESSURE SENSOR (SWITCH) |
2. Undo and remove the engine oil pressure warning light switch.
Refitting
- Replace the engine oil pressure warning light switch in its housing and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Switch for engine oil pressure warning light | M14 | 2.9 ÷ 3.5 |
- Connect the electrical connection for the engine oil pressure warning light switch.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Connect the negative battery terminal.
- Remove the vehicle from the lift.
Removing
- Disconnect the negative battery terminal.
1. Disconnect electrical connection (1a), unscrew and remove the engine oil pressure warning light switch (1b).
| Description | Connector | |
|---|---|---|
| 1a | Insufficient engine oil pressure sensor | See K030 LOW ENGINE OIL PRESSURE SENSOR (SWITCH) |
Refitting
- Replace the engine oil pressure warning light switch in its housing and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Switch for engine oil pressure warning light | M14 | 2.9 ÷ 3.5 |
- Connect the electrical connection for the engine oil pressure warning light switch.
- Connect the negative battery terminal.
Removing
- Disconnect the negative battery terminal.
1. Disconnect the electrical connection for the engine oil pressure warning light switch.
| Description | Connector | |
|---|---|---|
| 1 | Insufficient engine oil pressure sensor | See K030 LOW ENGINE OIL PRESSURE SENSOR (SWITCH) |
2. Undo and remove the engine oil pressure warning light switch from the cylinder head.
Refitting
- Replace the engine oil pressure warning light switch in its housing and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Switch for engine oil pressure warning light | M14 | 2.9 ÷ 3.5 |
- Connect the negative battery terminal.
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.