Engine oil intake duct - r.r

Make

Fiat

Model

Grande Punto Factory Service Manual

Year

2005–2012

Section

Engine lubrication › Engine oil intake duct - r.r

EngineEngine oil intake duct - r.r

ENGINE OIL INTAKE DUCT - R.R

Operation 1084B26 · ENGINE OIL LUBRICATION CIRCUIT

1.9 Multijet

Removing

Op. 0010T40 CHANGE MANUAL GEARBOX OIL

Op. 0010T10 CHANGE ENGINE OIL

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 3310A60 FRONT BRAKE PADS - REPLACE

Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R

Op. 2710A32 INTERMEDIATE DRIVESHAFT BEARING SUPPORT - R + R WITH INTERMEDIATE DRIVESHAFT REMOVED

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION

Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED

Refitting

Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED

Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 2710A32 INTERMEDIATE DRIVESHAFT BEARING SUPPORT - R + R WITH INTERMEDIATE DRIVESHAFT REMOVED

Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R

Op. 3310A60 FRONT BRAKE PADS - REPLACE

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 0010T40 CHANGE MANUAL GEARBOX OIL

Op. 0010T10 CHANGE ENGINE OIL

1.3 Multijet

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 0010T12 ENGINE OIL AND FILTER - REPLACE

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R

Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION

Op. 1020B10 COVER FOR TIMING SYSTEM WITH CHAIN DRIVE - R.R AND REPLACE GASKET

1. Working at the bench, unscrew the bolts (1a) and separate the engine oil intake (1b) with gasket (1c) from the timing system cover.

Refitting

- Position the engine oil intake duct complete with gasket in its housing in the timing cover and secure it using the bolts.

Op. 1020B10 COVER FOR TIMING SYSTEM WITH CHAIN DRIVE - R.R AND REPLACE GASKET

Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION

Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 0010T12 ENGINE OIL AND FILTER - REPLACE

08 Engine