REAR FUEL DELIVERY LINE - R.R

Operation 1040B36 · FUEL SUPPLY/RETURN CIRCUIT PIPE

1.3 Multijet, 1.9 Multijet

Removing

- Position the vehicle on a lift.

- Fold the rear seat cushion over.

1. Using the tool (1a) release and remove the access cover to the fuel pump assembly (1b).

1. Disconnect the rear fuel supply pipe rapid connector.

- Raise the vehicle.

1. Undo the bolts and remove the guard.

1. Disconnect the rapid connector and remove the rear fuel supply pipe from the clips.

1. Position a hydraulic lift underneath the fuel tank.

2. Loosen the bolts (2a) fixing the tank mounting bracket, right side, and lower the tank (2b).

- Remove the rear fuel supply pipe.

Refitting

- Place the rear fuel supply pipe back in its housing.

- Place the fuel tank in position and tighten the bolts securing the tank mounting bracket to the recommended torque.

- Remove the hydraulic lift positioned underneath the fuel tank.

- Fasten the rear fuel supply pipe using the clips and connect the rapid connector.

- Place the protection back in its housing and secure it using the bolts.

- Lower the vehicle.

- Connect the rear fuel supply pipe rapid connector.

- Place the access cover to the fuel pump assembly in position.

- Place the rear seat cushion in position.

- Remove the vehicle from the lift.

1.2 8v, 1.4 8v

Removing

- Position the vehicle on a lift.

Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R

Op. 1040E22 FUEL PIPE PROTECTION - R.R

1. Disconnect the front rapid connector for the rear fuel supply pipe.

- Position a hydraulic jack with a suitable support under the fuel tank.

2. Open the clips (2a) fastening the rear brake fluid pipes (2b) to the tank.

3. Unscrew the front bolts (3a) securing the tank support brackets (3b) to the body.

1. Unscrew the rear bolts (1a) securing the tank support brackets (1b) to the body.

1. Lower the fuel tank (1a) and disconnect the pump fuel supply pipe rapid connector (1b).

- Disconnect the fuel supply pipe from the fastening clips on the body and remove it.

Refitting

- Place the fuel supply pipe in its housing and secure it to the clips and connect it to the fuel pump.

- Raise the fuel tank using the hydraulic jack and secure it to the bodyshell tightening the bolts to the recommended torque.

- Remove the hydraulic jack.

- Secure the brake fluid pipes to the clips.

- Connect the front rapid connector for the rear fuel supply pipe.

Op. 1040E22 FUEL PIPE PROTECTION - R.R

Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R

- Remove the vehicle from the lift.