Crankcase sump and covers
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Engine › Crankcase sump and covers
Tightening torquesCrankcase sump and covers
CRANKCASE SUMP AND COVERS
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine oil drain plug | M22 | 4.0 ÷ 5.0 | 1.2 8v 1.4 8v | |
| Engine oil drain plug | M14 | 1.8 ÷ 2.2 | 1.3 Multijet 1.9 Multijet | |
| Engine oil drain plug | 1.8 ÷ 2.2 | 1.4 16v | ||
| Engine oil sump | Timing side and gearbox side bolts | M6 | 0.8 ÷ 1.0 | 1.9 Multijet |
| Engine oil sump | Side bolts | M8 | 2.2 ÷ 2.7 | 1.9 Multijet |
| Engine oil sump | Bolt | M6 | 0.8 ÷ 1.0 | 1.4 16v |
| Engine oil sump | Nut | M6 | 0.8 ÷ 1.0 | 1.4 16v |
| Engine oil sump - crankcase side | Bolt | M8 | 2.2 ÷ 2.7 | 1.2 8v 1.4 8v |
| Engine oil sump - rear cover side and oil pump side | Nut | M6 | 0.8 ÷ 1.0 | 1.2 8v 1.4 8v |
| Crankshaft oil seal front cover | Bolt (to be replaced) | M6 x 1 x 22 | 0.8 ÷ 1.0 | 1.9 Multijet |
| Engine oil sump - lower engine crankcase side | Bolt | M6 | 0.8 ÷ 1.0 | 1.3 Multijet |
| Engine oil sump - timing cover side | Nut | M6 | 0.8 ÷ 1.0 | 1.3 Multijet |
| Crankshaft oil seal front cover | Bolt | M6 x 1 x 35 | 0.8 ÷ 1.0 | 1.9 Multijet |
| Crankshaft oil seal front cover | Bolt | M6 | 0.8 ÷ 1.0 | 1.2 8v 1.4 8v 1.3 Multijet |
| Crankshaft oil seal front cover | Nut | M6 | 0.8 ÷ 1.0 | 1.3 Multijet |
| Crankshaft to crankcase rear cover | Bolt (to be replaced) | M6 | 0.8 ÷ 1.0 | 1.9 Multijet |
| Crankshaft to crankcase rear cover | Bolt | M6 | 0.8 ÷ 1.0 | 1.2 8v 1.4 8v 1.4 16v |
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTEngine gasket setSearch: Fiat Grande Punto 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.