Engine cooling
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Engine › Engine cooling
Tightening torquesEngine cooling
ENGINE COOLING
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water pump rigid inlet pipe | Bolt | M6 | 0.8 ÷ 1.0 | 1.9 Multijet |
| Water pump rigid inlet pipe | Bolt | M6 | 0.9 ÷ 1.1 | 1.4 16v |
| Thermostat | Bolt | M8 | 2.2 ÷ 2.7 | 1.3 Multijet 1.9 Multijet |
| Thermostat | Bolt | M6 | 0.8 ÷ 1.0 | 1.2 8v 1.4 8v |
| Thermostat | Bolt | M6 | 0.9 ÷ 1.1 | 1.4 16v |
| Water pump | Nut | M6 | 0.8 ÷ 1.0 | 1.3 Multijet |
| Water pump | Bolt | M8 | 2.2 ÷ 2.7 | 1.9 Multijet |
| Water pump | Bolt | M8 | 0.8 ÷ 1.0 | 1.2 8v 1.4 8v |
| Water pump | Bolt | M6 | 0.9 ÷ 1.1 | 1.4 16v |
| Water pump | Nut | M6 | 0.9 ÷ 1.1 | 1.4 16v |
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTEngine gasket setSearch: Fiat Grande Punto 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.