Emission control system
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Engine › Emission control system
Tightening torquesEmission control system
EMISSION CONTROL SYSTEM
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Lambda sensor | M18 | 4.1 ÷ 5.0 | 1.9 Multijet | |
| Lambda sensor | M18 | 4.1 ÷ 5.0 | 1.2 8v 1.4 8v 1.4 16v 1.3 Multijet 90 CV | |
| Catalytic preconverter | Collar nut | M10 | 2.2 ÷ 2.7 | 1.9 Multijet |
| Catalytic preconverter mounting bracket | Bolt | M8 | 2.2 ÷ 2.7 | 1.9 Multijet |
| Catalytic preconverter mounting bracket | Bolt | M8 | 2.2 ÷ 2.7 | 1.9 Multijet |
| Catalytic converter - front silencer side | Nut | M8 | 2.5 | 1.9 Multijet |
| Rear exhaust silencer | Bolt | M10 | 0.7 ÷ 0.9 | |
| Engine oil recovery manifold | Bolt | M6 | 0.8 ÷ 1.0 | 1.3 Multijet |
| Exhaust gas/water heat exchanger for E.G.R. system | Bolt | M8 | 2.3 ÷ 2.8 | 1.3 Multijet 1.9 Multijet |
| E.G.R. system solenoid valve | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 Multijet |
| Pressure intake pipe downstream of particle filter | Connector | 1.2 ÷ 1.6 | 1.3 Multijet 90CV 1.9 Multijet | |
| Exhaust gas temperature sensor on particle filter | M14x1.5 | 4.5 | 1.3 Multijet 90CV 1.9 Multijet |
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTExhaust gasketSearch: Fiat Grande Punto 2005 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.