Cylinder head/s
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Engine › Cylinder head/s
Tightening torquesCylinder head/s
CYLINDER HEAD/S
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Tappet cover | Bolt | M6 | 0.8 ÷ 1.0 | 1.2 8v 1.4 8v 1.3 Multijet 1.9 Multijet |
| Cylinder head | Bolt | M12 | 6.5 + 90° + 90° + 90° | 1.9 Multijet |
| Cylinder head | Bolt | M10 | 3.8 ÷ 4.2 + 90° + 90° | 1.3 Multijet |
| Cylinder head | Bolt | M9 | 2.9 ÷ 3.1 + 90° + 90° +/- 3° | 1.2 8v 1.4 8v |
| Cylinder head | Bolt | M9 | 3 + 90° + 90° | 1.4 16v |
| Engine camshaft housing | Bolt | M8 | 2.5 | 1.3 Multijet |
| Engine camshaft housing | Bolt | M7 | 1.8 | 1.3 Multijet |
| Engine camshaft housing | Bolt | M8 | 1.3 ÷ 1.6 | 1.4 16v |
| Camshaft housing plugs | M16 | 1.3 ÷ 1.6 | 1.4 16v | |
| Tapered plug in rear camshaft housing | M14 | 1.5 | 1.4 16v | |
| Tapered plug in front camshaft housing | M20 | 4.0 | 1.4 16v |
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTEngine gasket setSearch: Fiat Grande Punto 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.