Valve gear timing
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Engine › Valve gear timing
Tightening torquesValve gear timing
VALVE GEAR TIMING
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing moving tensioner | Nut | M8 | 2.3 ÷ 2.8 | 1.9 Multijet |
| Timing moving tensioner | Bolt | M6 | 0.8 ÷ 1.0 | 1.3 Multijet |
| Timing moving tensioner | Nut | M8 | 2.5 ÷ 3.1 | 1.2 8v 1.4 8v |
| Timing moving tensioner | Nut | M8 | 2.2 ÷ 2.7 | 1.4 16v |
| Timing tensioner moving support | Bolt | M12 | 2.8 ÷ 3.1 + 40° +/- 2° | 1.9 Multijet |
| Driven toothed pulley | Bolt | M12 | 13.5 ÷ 16.5 | 1.3 Multijet |
| Driven toothed pulley | Bolt | M12 | 2.8 ÷ 3.1 + 40° | 1.9 Multijet |
| Driven toothed pulley | Bolt | M12 | 1.8 ÷ 2.2 + 55° | 1.4 8v |
| Timing driven pullies | Bolt | M12 | 10.8 ÷ 13.2 | 1.4 8v |
| Cap for toothed driven pulley bolt | Plug | M27 | 2.5 ÷ 3.0 | 1.4 8v |
| Camshaft gears | Bolt | M12 | 13.5 ÷ 16.5 | 1.3 Multijet |
| Camshaft gears | Bolt | M12 | 12.0 | 1.4 16v |
| Toothed drive pulley | Left hand bolt | M16 | 32.3 ÷ 35.7 | 1.9 Multijet |
| Pulley support flange on crankshaft | Left hand bolt | M14 | 4.7 ÷ 5.2 + 75° +/- 3° | 1.3 Multijet |
| Timing fixed tensioner | Bolt | M10 | 4.5 ÷ 5.5 | 1.9 Multijet |
| Crankshaft gear | Bolt | M12 | 1.9 ÷ 2.1 + 107° ÷ 113° | 1.4 16v |
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTEngine gasket setSearch: Fiat Grande Punto 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.