HEATED SEATS - Functional description

Functional description

The power supply for the two seat relays J62A and J62B comes from the line controlled by relay T13 and protected by fuse F45, both housed in the junction unit under the dashboard B2.

The services relay T13 is energized according to the logic described above and controlled by the Body Computer M1 pin 14 connector F.

The energizing of the two relays, with the consequent supply of the two resistances for the heaters O40 and O41 takes place via the switches I65 and I66.

The switches I65 and I66 are, in turn, supplied by the ignition-operated line (INT) for fuse F49 of the junction unit under the dashboard B2.

The positive energizing command for the relays J62A and J62B also lights up the LED inside switches I65 and I66. to signal that the heating is activated.