Gearbox (page 2 of 6)
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (2000 range)
00 Introduction and technical dataGearbox · page 2 of 6
| DIFFERENTIAL - IDLER | Panda 1108 mpi | Panda 4 x 4 1108 mpi | |||
|---|---|---|---|---|---|
| Ratio crown wheel and pinion reduction |
16/57 (3.562) |
11/60 (5.455) |
|||
| 1st | 13.924 | 21.324 | |||
| 2nd | 7.868 | 11.215 | |||
| 3rd | 4.791 | 6.939 | |||
| 4th | 3.469 | 5.335 | |||
| 5th | 2.728 | 3.988 | |||
| R | 13.600 | 20.331 | |||
| Final drive ratio | |||||
| Differential internal housing bearing | conical roller bearings | ||||
| Adjustment of bearing pre-loading | by shims | ||||
| Thickness of shims | 0.40 - 1.00 | ||||
| Recommended interference for exact bearing pre-loading |
mm | bearings not loaded = 0.12 bearings loaded (350 daN) = 0.08 |
|||
| Planet/satellite gear pre-loading | mm | ≤ 0.10 | |||
| Adjustment of planet/satellite gear interference | by shims | ||||
| Thickness of shims | 0.80 - 1.15 | ||||
Parts & tools for this job For 1986 Fiat Panda
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.