Gearbox (page 6 of 6)
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (2000 range)
00 Introduction and technical dataGearbox · page 6 of 6
| Adjusting clearance between pinion and crown-wheel | by shims |
| Adjustment of bearing pre-loading | |
| Thickness of inner differential casing bearing pre-load shims | 6.50 ÷ 7.50 |
| Differential internal housing bearing | conical roller bearings |
| Bearing pre-loading (supports for differential internal housing) mm | 0.040 ÷ 0.050 |
| Clearance between pinion and crownwheel mm | 0.08 ÷ 0.15 |
Parts & tools for this job For 1986 Fiat Panda
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.