Coil spring
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (Panda 750 Young) › Coil spring
00 Introduction and technical dataCoil spring
Front suspension independent with lower swinging arms and telescopic struts, each consisting of a steel strut fastened rigidly to a double-acting hydraulic damper.
Coil springs and blocks in line with dampers.
Greased-for-life joints.
Coil spring
| Order number | 7585730 | |
|---|---|---|
| Thread diameter | mm | 9.7 ± 0.05 |
| Number of active coils | 6.25 | |
| Direction of coil | clockwise | |
| Free spring height | mm | 330 |
| Spring height under load of: 208.5 ± 8 daN | mm | 213 |
| Springs are divided into two categories that are identified by markings: yellow (1) springs under load of: 208.5±8 daN |
height of mm >213 | |
| green (1) springs under load of: 208.5±8 daN | height of mm ≤213 | |
(1) Mate springs with the same markings when installing.
Dampers
| Type | telescopic, double-acting | |
| Open (start of damping) | mm | 428.5 ± 2 |
| Closed | mm | 282.5 ± 2 |
| Stroke | mm | 146 |
Parts & tools for this job For 1986 Fiat Panda
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Fiat Panda 1986 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.