Rear suspension
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (Panda 750 Young) › Rear suspension
00 Introduction and technical dataRear suspension · page 1 of 2
Rear suspension
00.44
Rear suspension rigid axle with tubular structure and Ω shape with central pivoting and longitudinal reaction rods.
Coil springs and double-acting telescopic dampers.
Coil spring
| Order number | 7585731 | |
|---|---|---|
| Thread diameter | mm | 11.1 ± 0.05 |
| Number of active coils | 5 | |
| Coil direction | clockwise | |
| Free spring height | mm | 266 |
| Spring height under a load of: 257 daN | mm | 170 |
| Springs are divided into two categories, identified by markings: | ||
| yellow (1) springs under load of: 257 daN | height of mm | >170 |
| green (1) springs under load of: 257 daN | height of mm | ≤170 |
(1) Mate springs with same markings when installing
Dampers
| Type | telescopic, double-acting | |
|---|---|---|
| Open (start of damping) | mm | 420 ± 3 |
| Closed | mm | 252 ± 3 |
| Stroke | mm | 168 |
Parts & tools for this job For 1986 Fiat Panda
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTRear shock absorbersSearch: Fiat Panda 1986 rear shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.