Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)08 · 50 Auxiliary units
08 · General

Auxiliary units

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Manually controlled heater › Auxiliary units
50 Auxiliary unitsAuxiliary units

Auxiliary units

Manually controlled heater

View of the upper section of the heater assembly showing mounting points indicated by arrows
Two views of the heater case halves, with arrows indicating screw locations and a callout for hole (3)

P3M050H04

P3M050H05

Heater case showing top distribution flap (A), bottom flap (B), and mixer flap (C)

P3M051H02

  • unscrew screws indicated by arrows and screw at bottom of hole (3) that join the two distributor heater case halves;
  • unscrew the screws indicated by arrows that fasten square levers with toothed sectors (4 and 5) operating top distribution flap (A) and bottom flap (B) to left side surface of left case half;
  • firstly withdraw the two levers with toothed sector (4 and 5) from cylindrical ridges on the above surfaces and then remove rack (6);
  • unscrew screw (7) and withdraw intermediate idler lever (8) operating lower distribution flap (B) from cylindrical ridge of the above surfaces;
  • unscrew screw (9) and withdraw square lever (10) operating mixer flap (C) from cylindrical ridge of the above surface
Internal mechanism of the heater showing components numbered 4 through 10, including levers, sectors, and racks

P3M051H07

Side view of the heater assembly showing components numbered 11, 12, and 13

P3M066H01

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.