Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)08 · 50 Auxiliary units
08 · General

Manually controlled heater

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Manually controlled heater › Manually controlled heater
50 Auxiliary unitsManually controlled heater

Manually controlled heater

Front view of the car showing the front bumper and lower grille area with arrows indicating retaining screws.

P3M088H01

  • disconnect connectors of fog lamp units;
  • remove front bumpers from body by unscrewing the retaining screws shown in the figure;
Close-up view under the bonnet showing air conditioning pipes and components, with an arrow pointing to a specific fitting.

P3M088H02

NOTE Seal the ends of the pipes disconnected from the condenser with plugs to prevent the absorption of moisture that would impair efficient operation.

  • unscrew the arrowed fitting on the line from the condenser inlet duct;
View of the vehicle's front structure showing the condenser and radiator assembly with arrows indicating retaining points.

P3M088H03

Isolated view of the rectangular automotive condenser unit.

P3M088H04

  • unscrew the fitting from the condenser outlet duct;
  • remove the condenser by unscrewing the retaining screws shown in the figure.
  • to refit, reverse the order of operations carried out for removal.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.