Condenser

CONDENSER

Removing

• working on the front side part of the engine bay, undo spring links (1) that retain front side turn signals (2) in place
• working from the outside, withdraw tabs of side indicators (2) from the guides on the sides of front headlamps (3). Disconnect supply lead connectors from the rear part of the indicators;
• unscrew screws (4) that retain front headlamps (3) in a certain position on the top front beam (5);
• remove the above headlamps (3) from seats and disconnect supply lead connectors from the rear;
• unscrew the screws arrowed in the second figure at the top that fasten top of front bumper to body;

• unscrew screws (6) that fasten front wheel arch linings to front bumper (7) and move linings slightly to unscrew the screws that fasten the top side end parts of the bumpers to the body;
• working on the side inner parts of the front bumpers, disconnect fog lamp supply leads;

• lift vehicle and unscrew screws indicated by arrows in bottom figure that fasten front bumpers to body at the bottom;
• remove front bumper from its housing;