1004b - power unit overview (page 2 of 9)

(Cont. Op. 1004B10)

1. Unscrew the engine compartment protection screws.
2. Remove the engine compartment protection.

1. Disconnect the engine coolant lower outlet sleeve from the radiator and drain the coolant into a suitable container.

• Lower the car.

1. Take out the hot air intake sleeve from the discharge manifold.

1. Take out the oil vapours recovery pipe from the tappets cover.
2. Take out the vacuum intake pipe from the throttle case.
3. Unscrew the throttle case air conveyor screws.
4. Unscrew the nut fastening the air filter to the support.
5. Take out the absolute pressure sensor pipe.

1. Remove the air filter group with the pipes and throttle case conveyor.

(Cont.)