1004b - power unit overview (page 3 of 9)

(Cont. Op. 1004B10)

1. Unscrew the screws (1a) of the air filter support (1b) and remove it.

2. Disconnect the clutch release flexible pipe from the thrust bearing control linkage.

3. Disconnect the reversing lights switch electrical connection

4. Take out the clips from the gear engagement hose sheaths.

5. Withdraw the ends of the gear engagement hoses.

6. Withdraw the lambda sensor cable from the mounts on the body.
7. Electrically disconnect the lambda sensor

(Cont.)